i screwed up my Volume increase hack settings

[theTechnician]

Hey guys lol this is a neat hack that DID increase my volume..I was trying to get my volume for my bluetooth louder when listening to streaming radio..etc Now i changed some of the other gain values higher and when i use the phone people are too loud where it sound like an echo and a high pitch like the mic is way up...I changed it down but still no results even after soft reset

Can someone tell me there default values so i can set mine back..thnxs i think its 12 of them

[daniel]

Ive only changed my BluetoothPathGain (i think)

BluetoothMicPathGain = 0
BluetoothPathGain = 18
EmuMicPathGain = 0
EmuPathGain = 8
HandsetMicPathGain = 23
HandsetPathGain = 8
MonoHdstMicPathGain = 28
MonoHdstPathGain = 8
SpkrphnMicPathGain = 31
SpkrphnPathGain = 8
StereoHdstMicPathGain = 28
StereoHdstPathGain = 8

[theTechnician]

Originally Posted by daniel

Ive only changed my BluetoothPathGain (i think)

BluetoothMicPathGain = 0
BluetoothPathGain = 18
EmuMicPathGain = 0
EmuPathGain = 8
HandsetMicPathGain = 23
HandsetPathGain = 8
MonoHdstMicPathGain = 28
MonoHdstPathGain = 8
SpkrphnMicPathGain = 31
SpkrphnPathGain = 8
StereoHdstMicPathGain = 28
StereoHdstPathGain = 8

thanks a million man now i wont need a hearing aid too soon!

[cryptk]

dear god I love all of you... I will be handing out some +rep on this one!

I just got a chatterbox, itis basically a 2 way radio that you install on a motorcycle helmet. It has bluetooth in it and the Q recognizes it as both a hands-free and as a stereo headset. All is good on the bluetooth for calls, but listening to media (music) it is WAY to quiet. now I see why...

BluetoothPathGain = 18
StereoHdstPathGain = 8

so i am thinking that is I increase the stereoheadsetpathgain to match the bluetoothpathgain then it should be about the same volume as my calls and I will actually be able to hear my music!

[jaycsin]

Originally Posted by cryptk

dear god I love all of you... I will be handing out some +rep on this one!

I just got a chatterbox, itis basically a 2 way radio that you install on a motorcycle helmet. It has bluetooth in it and the Q recognizes it as both a hands-free and as a stereo headset. All is good on the bluetooth for calls, but listening to media (music) it is WAY to quiet. now I see why...

BluetoothPathGain = 18
StereoHdstPathGain = 8

so i am thinking that is I increase the stereoheadsetpathgain to match the bluetoothpathgain then it should be about the same volume as my calls and I will actually be able to hear my music!

Be careful the music was set lower for a reason....So you can hear the dump truck that is about to smash you to bits! Might want to turn it down a bit.

[mike250rs]

may want to try 12 or so to start.

...as always power cycle the device after a registy edit for it to take affect. Also saving a copy before hacking at it is a good practice.

[cryptk]

got it all dialed in now. Loud enough that I can hear the music, not so loud that I can't hear traffic. Thanks ppl ;)

[nettech_gt]

I found this reg hack here: http://www.everythingq.com/forum/55737-post473.html

But I have a Q9h and the "BaseGains" isn't there. Is there a different way of doing it for the Q9h? THANX!!

[Q-er]

Originally Posted by daniel

Ive only changed my BluetoothPathGain (i think)

BluetoothMicPathGain = 0
BluetoothPathGain = 18
EmuMicPathGain = 0
EmuPathGain = 8
HandsetMicPathGain = 23
HandsetPathGain = 8
MonoHdstMicPathGain = 28
MonoHdstPathGain = 8
SpkrphnMicPathGain = 31
SpkrphnPathGain = 8
StereoHdstMicPathGain = 28
StereoHdstPathGain = 8

Hi! Just found this site about a week ago and LOVE it - the fyi's, fixes, and of course the witty humor. Anyhow, I made this registry edit and it adjusted the BT volume fine, but now when I use WindowsMedia, the volume won't go up or down - just one steady volume. Is it the EmuPathGain that needs to be changed? Please help if possible. (i've gotta Q9m) Thanks
(to you and all the great tech-ies/hackers out there)

[stockspeed]

I changed these setting a while back, but when the volume is high enough for the media player, its way to high on the same headset when I'm talking on the phone. I don't use bluetooth...so those are both 0. I've set the headset to 4 and the phone call volume is good but can't hear muic from media player. If i set the headset to 12 the music is loud enough but the phone calls will make me deaf in about a week. :-)

BluetoothMicPathGain = 0
BluetoothPathGain = 0
EmuMicPathGain = 0 ---Anyone lnow what these are (EMU)?
EmuPathGain = 8---Anyone lnow what these are (EMU)?
HandsetMicPathGain = 23
HandsetPathGain = 8
MonoHdstMicPathGain = 28
MonoHdstPathGain = 8
SpkrphnMicPathGain = 31
SpkrphnPathGain = 8
StereoHdstMicPathGain = 28
StereoHdstPathGain = 8

Also, anyone know what the values in here do? They seem as if they'd be the likely suspects because it's called the 'InCallAudioGains'.

HKLM\Software\Motorola\BPCTRLR\WaveDev\InCallAudio Gains
ActiveAudioDevice = 32 ---was going to change, but it might be a device ID?
MOT_SND_DEVICE_BTHEADSETGain = 3
MOT_SND_DEVICE_EMUGain = 3
MOT_SND_DEVICE_HANDSETGain = 5
MOT_SND_DEVICE_HEADSETGain = 0---or maybe this to -8? wonder if it would take negative values?
MOT_SND_DEVICE_SPKR_PHONEGain = 2